Score:1

HP DL380 G8 Fan #6 Running at full speed when server is powered off

us flag

I have a HP DL380p G8 with all supported HP hardware installed, this includes 2 300gb SAS HDDs, 1 1.2TB SAS HDD, and a HP SFP+ add-in card for networking.

When the server is powered off and is still plugged in, fan #6 only runs at almost full speed. HP iLO does not report fan speeds (among other things) when the server is off.

Server is in power saver mode in both the bios and OS.

Anyone know why this one fan would be running and at such high RPM (relative to powered on state)?

Michael Hampton avatar
cz flag
BIOS power saving should be set to OS Controlled. This may or may not solve the immediate fan problem, but will solve a variety of other power management problems you are having or about to have.
ehammer avatar
us flag
Changed it to os controlled. No change to fan speed when off. Havent had any power management problems, but good to know.
Score:2
us flag

The SFP+ daughter card I had installed (HP Flexfabric Network Card) apparently ramps up a single fan (#6) to cool the card when the server is off.

Replaced the SFP+ card with a regular 4 port RJ45 NIC and the fans arent even spinning when the server is off.

Honestly, it doesnt make any sense why a single fan would need to be at such high rpm to cool a nic that should be seeing very little traffic and be running a lot cooler compared to a server with a workload running. The fan speed for #6 when the server is powered on (and the NIC is much more active) sits at 12% (barely audible).

djdomi avatar
za flag
It's easy to declare - if you have 6x fans running at a low RPM is the moving more volume at the same time as a single one with the same rpm
ehammer avatar
us flag
Then why not have all 6 fans running at a low rpm when off if it moves more air?
djdomi avatar
za flag
Because its HP Logic, you don't need to understand, but its logic says to cool the component to protect from standing, non movement heat. I think it will be silenced after some minutes
mangohost

Post an answer

Most people don’t grasp that asking a lot of questions unlocks learning and improves interpersonal bonding. In Alison’s studies, for example, though people could accurately recall how many questions had been asked in their conversations, they didn’t intuit the link between questions and liking. Across four studies, in which participants were engaged in conversations themselves or read transcripts of others’ conversations, people tended not to realize that question asking would influence—or had influenced—the level of amity between the conversationalists.