I have installed microk8s(1.24/stable) on two machines.
The ip of the two machines are:172.29.99.187, 172.29.99.188.
I operate the command at 172.29.99.187:microk8s add-node
Output:
From the node you wish to join to this cluster, run the following:
microk8s join 172.29.99.187:25000/57a191d07ce8fe360e13f4f1e9026ce8/5be428d4e916
Use the '--worker' flag to join a node as a worker not running the control plane, eg:
microk8s join 172.29.99.187:25000/57a191d07ce8fe360e13f4f1e9026ce8/5be428d4e916 --worker
If the node you are adding is not reachable through the default interface you can use one of the following:
microk8s join 172.29.99.187:25000/57a191d07ce8fe360e13f4f1e9026ce8/5be428d4e916
microk8s join 192.168.192.122:25000/57a191d07ce8fe360e13f4f1e9026ce8/5be428d4e916
microk8s join 172.24.0.1:25000/57a191d07ce8fe360e13f4f1e9026ce8/5be428d4e916
microk8s join 172.30.239.1:25000/57a191d07ce8fe360e13f4f1e9026ce8/5be428d4e916
microk8s join 172.17.0.1:25000/57a191d07ce8fe360e13f4f1e9026ce8/5be428d4e916
I operate the command at 172.29.99.188:
microk8s join 172.29.99.187:25000/57a191d07ce8fe360e13f4f1e9026ce8/5be428d4e916
Output:
Contacting cluster at 172.29.99.187
Connection failed. The hostname (cxsw) of the joining node does not resolve to the IP "172.29.99.188". Refusing join (400).