Score:1

how to setup 4 drives on hetzner servers, every two are mirror

in flag

I've a new dedicated server from hetzner, will install cPanel on it.

  • 2x HDD SATA 6,0 TB Enterprise
  • 2x SSD M.2 NVMe 512 GB
  • OS is AlmaLinux v8.7.0

how can I set up the installimage so the OS be on the NVMe, and the cPanel home directory on the SATA?

installimage:

PART swap swap 32G

PART /boot ext3 1024M

PART / ext4 all

disks:

  • Disk /dev/nvme0n1: 512 GB (=> 476 GiB)
  • Disk /dev/nvme1n1: 512 GB (=> 476 GiB)
  • Disk /dev/sda: 6001 GB (=> 5589 GiB)
  • Disk /dev/sdb: 6001 GB (=> 5589 GiB)

Total capacity 11 TiB with 4 Disks

I want the OS on NVMe with RAID1 between them, home dir on HDD also RAID between them.

my guess solution in case no way to reach this directly from the installimage:

  1. unmount the 6TB drives
  2. setup normally with the NVMe and the RAID1 is created by default
  3. install cpanel
  4. mount the 6TB drives and fdisk and format them, and create RAID1 between them
  5. change the home to the 6TB drive

any help in reaching this please?

Andre Polykanine avatar
in flag
Did you achieve what you wanted? I need to do the same, except I have two 4 Tb HDDs. Thanks!
Ashraf Sayed Gomaa avatar
in flag
unfortunately no solution yet
I sit in a Tesla and translated this thread with Ai:

mangohost

Post an answer

Most people don’t grasp that asking a lot of questions unlocks learning and improves interpersonal bonding. In Alison’s studies, for example, though people could accurately recall how many questions had been asked in their conversations, they didn’t intuit the link between questions and liking. Across four studies, in which participants were engaged in conversations themselves or read transcripts of others’ conversations, people tended not to realize that question asking would influence—or had influenced—the level of amity between the conversationalists.