I see paths that are no longer valid along with valid ones. How do I prevent them showing up in the output. I expect four valid paths.
The volume was earlier exported with LUN 13 and later 14 which shows as failed paths in the below output. The volume was properly flushed from the host and later exported to host with LUN 12. I made sure "multipath -ll" output did not have this volume before exporting with LUN 12.
root# multipath -ll
1703248.744611 | sdar: prio = const (setting: emergency fallback - alua failed)
1703248.745270 | sdas: prio = const (setting: emergency fallback - alua failed)
1703248.745918 | sday: prio = const (setting: emergency fallback - alua failed)
1703248.746573 | sdba: prio = const (setting: emergency fallback - alua failed)
1703248.747204 | sdbf: prio = const (setting: emergency fallback - alua failed)
1703248.747835 | sdbg: prio = const (setting: emergency fallback - alua failed)
mpathhl (1234567891bcdefg123456780911234ab) dm-0 ABC,FlashArray
size=7.0G features='0' hwhandler='1 alua' wp=rw
`-+- policy='round-robin 0' prio=50 status=active
|- 29:0:0:12 sdan 66:112 active ready running
|- 25:0:0:12 sdap 66:144 active ready running
|- 30:0:0:12 sdaq 66:160 active ready running
|- 13:0:0:12 sdaj 66:48 active ready running
|- 29:0:0:13 sdar 66:176 failed faulty running
|- 25:0:0:13 sdas 66:192 failed faulty running
|- 30:0:0:13 sday 67:32 failed faulty running
|- 29:0:0:14 sdba 67:64 failed faulty running
|- 25:0:0:14 sdbf 67:144 failed faulty running
`- 30:0:0:14 sdbg 67:160 failed faulty running