worked fine before, some "important updates" appeared and now it doesnt work
tethering with an android device also doesnt work (but its detected)
dualbooting with windows (it works), and everything is fine when booting linux from usb
lshw
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: enp5s0
version: 0c
serial: b4:2e:99:e8:ce:42
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.14.0-11.1-liquorix-amd64 duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:35 ioport:e000(size=256) memory:fcb00000-fcb00fff memory:f0300000-f0303fff
ifconfig
anbox0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.250.1 netmask 255.255.255.0 broadcast 0.0.0.0
ether 92:2f:d4:53:ce:69 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp5s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether b4:2e:99:e8:ce:42 txqueuelen 1000 (Ethernet)
RX packets 2855 bytes 1732597 (1.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2083 bytes 325076 (325.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 762 bytes 61646 (61.6 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 762 bytes 61646 (61.6 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
sorry for bad english
