ubuntu 20.04.03 cannot access internet

sudo nano /etc/netplan/00-installer-config.yaml after I installed my ubuntu server, I cannot access the internet. I am able to access it from my network. Any idea what would it be? I installed the basic/default settings.

Thanks

pctech@live:~$ ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul
t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group de
fault qlen 1000 link/ether 00:50:56:b1:66:36 brd ff:ff:ff:ff:ff:ff
inet 192.168.51.111/22 brd 192.168.51.255 scope global dynamic ens160
valid_lft 604225sec preferred_lft 604225sec
inet6 fe80::250:56ff:feb1:6636/64 scope link
valid_lft forever preferred_lft forever


pctech@live:~$ cat /etc/netplan/*.yaml

# This is the network config written by 'subiquity'
network:
  ethernets:
    ens160:
      dhcp4: true
  version: 2

Please amend your netplan file. First, find out it's exact name:

ls /etc/netplan

Next, edit the file:

sudo nano /etc/netplan/<what_you_found>.yaml

Amend it to read:

network:
  version: 2
  renderer: networkd
  ethernets:
    ens160:
      dhcp4: true

Netplan is very specific about spacing, identation, etc. so proofread carefully twice. Save (Ctrl+o followed by Enter) and exit the text editor nano (Ctrl+x followed by Enter).

Follow with:

sudo netplan generate
sudo netplan apply

Test:

ping -c3 8.8.8.8
ping -c3 www.ubuntu.com

If you get ping returns from both, you're all set.