Score:2

WiFi Issue (Qualcomm Atheros QCA6174)

fi flag

In addition to Windows, I also have Kubuntu 22.04. In Kubuntu I faced the problem on my laptop (Xiaomi Redmibook 14 RyzenEdition) - OS can't see network card. I've found the guide link but this information is not relevant. Current repository has a lot of directories. Do I have to download all of it?

What did I do:

  1. downloaded linux-firmware
  2. Create a directory (/lib/firmware/ath10k/QCA6174/hw3.0/)
  3. Downloaded board.bin, board-2.bin and firmware-4.bin

dmesg:

[    3.254464] ath10k_pci 0000:01:00.0: invalid firmware magic
[    3.254554] ath10k_pci 0000:01:00.0: Failed to find firmware-N.bin (N between 2 and 6) from ath10k/QCA6174/hw3.0: -2
[    3.254598] ath10k_pci 0000:01:00.0: could not fetch firmware files (-2)
[    3.254623] ath10k_pci 0000:01:00.0: could not probe fw (-2)

ls lib/firmware/ath10k

QCA4019 QCA6174 QCA9377 QCA9887 QCA9888 QCA988X QCA9984 QCA99X0 WCN3990

and QCA6174 has hw2.1 , hw3.0.

ls hw3.0

board-2.bin board.bin firmware-4.bin

Still doesn't work(

after reinstall linux-firmware

board-2.bin  
firmware-4.bin  
firmware-sdio-6.bin          
notice_ath10k_firmware-6.txt 
board.bin    
firmware-6.bin 
notice_ath10k_firmware-4.txt  
notice_ath10k_firmware-sdio-6

--

[    3.364952] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    3.643853] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 11ad:0847
[    3.643862] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[    3.644421] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00157-QCARMSWPZ-1 api 6 features wowlan,ignore-otp,mfp crc32 90eebefb
[    3.709239] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=003e,subsystem-vendor=11ad,subsystem-device=0847 from ath10k/QCA6174/hw3.0/board-2.bin
[    3.709488] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 ed5f849a
[    6.966917] ath10k_pci 0000:01:00.0: htt version request timed out
[    6.966927] ath10k_pci 0000:01:00.0: failed to setup htt: -110
[    7.047370] ath10k_pci 0000:01:00.0: could not init core (-110)
[    7.047436] ath10k_pci 0000:01:00.0: could not probe fw (-110)
andrew.46 avatar
in flag
Comments are not for extended discussion; this conversation has been [moved to chat](https://chat.stackexchange.com/rooms/139717/discussion-on-question-by-mark-baudelaire-wifi-issue-qualcomm-atheros-qca6174).
Score:2
fi flag

Thanks for helping @Pilot6

Solution:

  1. sudo apt install --reinstall linux-firmware
  2. sudo rm /lib/firmware/ath10k/QCA6174/hw3.0/board-2.bin
  3. Reboot, if doesn't work then
sudo wget https://github.com/kvalo/ath10k-firmware/blob/master/QCA6174/hw3.0/2.0/board.bin -O /lib/firmware/ath10k/QCA6174/hw3.0/board.bin

You can also text me. Good luck!

Pilot6 avatar
cn flag
So did it work?
Mark Baudelaire avatar
fi flag
Yes, it did. But I took board.bin from another source
Pilot6 avatar
cn flag
It is great you found the solution.
I sit in a Tesla and translated this thread with Ai:

mangohost

Post an answer

Most people don’t grasp that asking a lot of questions unlocks learning and improves interpersonal bonding. In Alison’s studies, for example, though people could accurately recall how many questions had been asked in their conversations, they didn’t intuit the link between questions and liking. Across four studies, in which participants were engaged in conversations themselves or read transcripts of others’ conversations, people tended not to realize that question asking would influence—or had influenced—the level of amity between the conversationalists.