I got the power file using McPat, and the content format is as follows
Processor:
Area = 193.678 mm^2
Peak Power = 130.943 W
Total Leakage = 33.2925 W
Peak Dynamic = 97.6503 W
Subthreshold Leakage = 31.7454 W
Subthreshold Leakage with power gating = 14.035 W
Gate Leakage = 1.54706 W
Runtime Dynamic = 31.5578 W
Total Cores: 4 cores
Device Type= ITRS high performance device type
Area = 130.433 mm^2
Peak Dynamic = 97.5971 W
Subthreshold Leakage = 24.8751 W
Subthreshold Leakage with power gating = 10.3324 W
Gate Leakage = 1.49199 W
Runtime Dynamic = 31.5472 W
Total L3s:
Type= ITRS high performance device type
Area = 61.9075 mm^2
Peak Dynamic = 0.0532246 W
Subthreshold Leakage = 6.80085 W
Subthreshold Leakage with power gating = 3.32364 W
Gate Leakage = 0.0484137 W
Runtime Dynamic = 0.0106703 W
Total NoCs (Network/Bus):
Device Type= ITRS high performance device type
Area = 1.3377 mm^2
Peak Dynamic = 0 W
Subthreshold Leakage = 0.0694515 W
Subthreshold Leakage with power gating = 0.0260443 W
Gate Leakage = 0.00666015 W
Runtime Dynamic = 0 W
*****************************************************************************************
Core:
Area = 32.6082 mm^2
Peak Dynamic = 28.9664 W
Subthreshold Leakage = 6.21877 W
Subthreshold Leakage with power gating = 2.58311 W
Gate Leakage = 0.372997 W
Runtime Dynamic = 10.5062 W
Instruction Fetch Unit:
Area = 5.86007 mm^2
Peak Dynamic = 8.96874 W
Subthreshold Leakage = 0.932587 W
Subthreshold Leakage with power gating = 0.408542 W
Gate Leakage = 0.0590479 W
Runtime Dynamic = 0.873336 W
Instruction Cache:
Area = 3.14635 mm^2
Peak Dynamic = 6.43323 W
Subthreshold Leakage = 0.367022 W
Subthreshold Leakage with power gating = 0.180386 W
Gate Leakage = 0.029931 W
Runtime Dynamic = 0.0930813 W
......
As shown above, I got the power file and how to convert it into a format capable of being fed into the HotSpot Thermal Calculation Model software？Has any friend used these two software, thank you very much？By the way, the McPat I use is integrated into the Sniper multi-core simulator.
