I am new to the Freeradius
I am trying to connect to the Unifi AP through freeradius authentication. I can connect to it successfully and access local services. but I am not getting the correct IP address.
SSID is in VLAN 31 with IPs ranging in 172.31.x.x, AP is connected to the network of 192.168.1.x. The radius server is also connected to 192.168.1.x. with radius authentication, all devices connected to it are getting IPs in 172.31.x.x but after enabling radius all IPs are in 192.168.1.x
user config
testing Cleartext-Password := "password"
Tunnel-Type = VLAN,
Tunnel-Private-Group-Id = 31,
Reply-Message := "Hello, %{User-Name}"
client config
client unifiaps {
ipaddr = 192.168.1.0/24
secret = test123
nas_type = other
}
Logs
(9) Sent Access-Accept Id 180 from 192.168.1.3:1812 to 192.168.1.68:58269 length 0
(9) Tunnel-Type = VLAN
(9) Tunnel-Private-Group-Id = "31"
(9) User-Name = "testing"
(9) MS-MPPE-Recv-Key = 0x720ca351776ebcd3569bacffaf5550b397aa7210f096116be73006c8838a94bb
(9) MS-MPPE-Send-Key = 0x1ef55245e2649753103c727e520822d9ef8e9b2dd8f476404b90466106c0f1b2
(9) EAP-Message = 0x03070004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) Finished request
(10) Received Accounting-Request Id 181 from 192.168.1.68:44985 to 192.168.1.3:1813 length 217
(10) Acct-Status-Type = Start
(10) Acct-Authentic = RADIUS
(10) User-Name = "testing"
(10) NAS-IP-Address = 192.168.1.68
(10) Framed-IP-Address = 192.168.1.207
can someone tell me what I am doing wrong