I am trying to set up a Wifi 6 Access point with an Intel AX210 card on Debian Bookworm.
My configuration of the hostapd.conf file looks like:
interface=wlp2s0
bridge=br0
driver=nl80211
hw_mode=a
channel=93
ieee80211d=1
ieee80211ac=1
wmm_enabled=1
country_code=DE
ieee80211d=1
ieee80211h=1
basic_rates=60 120 240
ieee80211ax=1
ieee80211n=1
rts_threshold=-1
fragm_threshold=-1
beacon_int=100
dtim_period=2
max_num_sta=255
ssid=WLAN-RF001
auth_algs=3
eap_server=1
ieee8021x=1
eapol_version=2
wpa=2
wpa_key_mgmt=WPA-EAP
rsn_pairwise=CCMP
wpa_pairwise=TKIP
eap_user_file=/etc/hostapd/hostapd.eap_user
ca_cert=/etc/hostapd/ssl/cacert.pem
server_cert=/etc/hostapd/ssl/hostapd.pem
private_key=/etc/hostapd/ssl/hostapd.key
dh_file=/etc/hostapd/ssl
logger_syslog=-1
logger_syslog_level=1
logger_stdout=-1
logger_stdout_level=1
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
The channel 93 seems to be enabled now as per iw list:
[..]
Band 4:
HE Iftypes: managed
HE MAC Capabilities (0x78018a30abc0):
+HTC HE Supported
Trigger Frame MAC Padding Duration: 2
Multi-TID Aggregation Support: 7
Broadcast TWT
32-bit BA Bitmap
OM Control
Maximum A-MPDU Length Exponent: 1
RX Control Frame to MultiBSS
A-MSDU in A-MPDU
Multi-TID Aggregation TX: 7
UL 2x996-Tone RU
HE PHY Capabilities: (0x0c3f0e09fd098c160ffc01):
HE40/HE80/5GHz
HE160/5GHz
Punctured Preamble RX: 15
Device Class: 1
LDPC Coding in Payload
NDP with 4x HE-LTF and 3.2us GI
STBC Tx <= 80MHz
STBC Rx <= 80MHz
DCM Max Constellation: 1
DCM Max Constellation Rx: 1
SU Beamformee
Beamformee STS <= 80Mhz: 7
Beamformee STS > 80Mhz: 7
Sounding Dimensions <= 80Mhz: 1
Sounding Dimensions > 80Mhz: 1
Triggered SU Beamforming Feedback
Triggered MU Beamforming Feedback
PPE Threshold Present
Power Boost Factor ar
HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI
Max NC: 2
HE ER SU PPDU 4x HE-LTF 0.8us GI
20MHz in 40MHz HE PPDU 2.4GHz
20MHz in 160/80+80MHz HE PPDU
80MHz in 160/80+80MHz HE PPDU
TX 1024-QAM
RX 1024-QAM
RX Full BW SU Using HE MU PPDU with Compression SIGB
RX Full BW SU Using HE MU PPDU with Non-Compression SIGB
HE RX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE RX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set 160 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
PPE Threshold 0x61 0x1c 0xc7 0x71
EHT Iftypes: managed
EHT MAC Capabilities (0x0000):
EHT PHY Capabilities: (0x0000000000000000):
EHT MCS/NSS: (0x):
EHT bw <= 80 MHz, max NSS for MCS 8-9: Rx=0, Tx=0
EHT bw <= 80 MHz, max NSS for MCS 10-11: Rx=0, Tx=0
EHT bw <= 80 MHz, max NSS for MCS 12-13: Rx=0, Tx=0
EHT bw=160 MHz, max NSS for MCS 8-9: Rx=0, Tx=0
EHT bw=160 MHz, max NSS for MCS 10-11: Rx=0, Tx=0
EHT bw=160 MHz, max NSS for MCS 12-13: Rx=0, Tx=0
HE Iftypes: AP
HE MAC Capabilities (0x78010a100000):
+HTC HE Supported
Trigger Frame MAC Padding Duration: 2
Multi-TID Aggregation Support: 7
Broadcast TWT
OM Control
Maximum A-MPDU Length Exponent: 1
HE PHY Capabilities: (0x04200e090009800401c400):
HE40/HE80/5GHz
LDPC Coding in Payload
NDP with 4x HE-LTF and 3.2us GI
STBC Tx <= 80MHz
STBC Rx <= 80MHz
DCM Max Constellation: 1
DCM Max Constellation Rx: 1
Sounding Dimensions <= 80Mhz: 1
Sounding Dimensions > 80Mhz: 1
PPE Threshold Present
HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI
HE ER SU PPDU 4x HE-LTF 0.8us GI
TX 1024-QAM
HE RX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
HE TX MCS and NSS set <= 80 MHz
1 streams: MCS 0-11
2 streams: MCS 0-11
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
PPE Threshold 0x61 0x1c 0xc7 0x71
EHT Iftypes: AP
EHT MAC Capabilities (0x0000):
EHT PHY Capabilities: (0x0000000000000000):
EHT MCS/NSS: (0x):
EHT bw <= 80 MHz, max NSS for MCS 8-9: Rx=0, Tx=0
EHT bw <= 80 MHz, max NSS for MCS 10-11: Rx=0, Tx=0
EHT bw <= 80 MHz, max NSS for MCS 12-13: Rx=0, Tx=0
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5955 MHz [1] (22.0 dBm)
* 5975 MHz [5] (22.0 dBm)
* 5995 MHz [9] (22.0 dBm)
* 6015 MHz [13] (22.0 dBm)
* 6035 MHz [17] (22.0 dBm)
* 6055 MHz [21] (22.0 dBm)
* 6075 MHz [25] (22.0 dBm)
* 6095 MHz [29] (22.0 dBm)
* 6115 MHz [33] (22.0 dBm)
* 6135 MHz [37] (22.0 dBm)
* 6155 MHz [41] (22.0 dBm)
* 6175 MHz [45] (22.0 dBm)
* 6195 MHz [49] (22.0 dBm)
* 6215 MHz [53] (22.0 dBm)
* 6235 MHz [57] (22.0 dBm)
* 6255 MHz [61] (22.0 dBm)
* 6275 MHz [65] (22.0 dBm)
* 6295 MHz [69] (22.0 dBm)
* 6315 MHz [73] (22.0 dBm)
* 6335 MHz [77] (22.0 dBm)
* 6355 MHz [81] (22.0 dBm)
* 6375 MHz [85] (22.0 dBm)
* 6395 MHz [89] (22.0 dBm)
* 6415 MHz [93] (22.0 dBm)
* 6435 MHz [97] (22.0 dBm)
* 6455 MHz [101] (22.0 dBm)
* 6475 MHz [105] (22.0 dBm)
* 6495 MHz [109] (22.0 dBm)
* 6515 MHz [113] (22.0 dBm)
* 6535 MHz [117] (22.0 dBm)
* 6555 MHz [121] (22.0 dBm)
* 6575 MHz [125] (22.0 dBm)
* 6595 MHz [129] (22.0 dBm)
* 6615 MHz [133] (22.0 dBm)
* 6635 MHz [137] (22.0 dBm)
* 6655 MHz [141] (22.0 dBm)
* 6675 MHz [145] (22.0 dBm)
* 6695 MHz [149] (22.0 dBm)
* 6715 MHz [153] (22.0 dBm)
* 6735 MHz [157] (22.0 dBm)
* 6755 MHz [161] (22.0 dBm)
* 6775 MHz [165] (22.0 dBm)
* 6795 MHz [169] (22.0 dBm)
* 6815 MHz [173] (22.0 dBm)
* 6835 MHz [177] (22.0 dBm)
* 6855 MHz [181] (22.0 dBm)
* 6875 MHz [185] (22.0 dBm)
* 6895 MHz [189] (22.0 dBm)
* 6915 MHz [193] (22.0 dBm)
* 6935 MHz [197] (22.0 dBm)
* 6955 MHz [201] (22.0 dBm)
* 6975 MHz [205] (22.0 dBm)
* 6995 MHz [209] (22.0 dBm)
* 7015 MHz [213] (22.0 dBm)
* 7035 MHz [217] (22.0 dBm)
* 7055 MHz [221] (22.0 dBm)
* 7075 MHz [225] (22.0 dBm)
* 7095 MHz [229] (22.0 dBm)
* 7115 MHz [233] (22.0 dBm)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* remain_on_channel
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* tdls_mgmt
* tdls_oper
* start_sched_scan
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* channel_switch
* set_qos_map
* add_tx_ts
* set_multicast_to_unicast
WoWLAN support:
* wake up on disconnect
* wake up on magic packet
* wake up on pattern match, up to 20 patterns of 16-128 bytes,
maximum packet offset 0 bytes
* can do GTK rekeying
* wake up on GTK rekey failure
* wake up on EAP identity request
* wake up on 4-way handshake
* wake up on rfkill release
* wake up on network detection, up to 8 match sets
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
total <= 3, #channels <= 2
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports per-vif TX power setting
P2P GO supports CT window setting
P2P GO supports opportunistic powersave setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
Device adds DS IE to probe requests
Device can update TPC Report IE
Device supports static SMPS
Device supports dynamic SMPS
Device supports WMM-AC admission (TSPECs)
Device supports configuring vdev MAC-addr on create.
Device supports randomizing MAC-addr in scans.
Device supports randomizing MAC-addr in sched scans.
Device supports randomizing MAC-addr in net-detect scans.
max # scan plans: 2
max scan plan interval: 65535
max scan plan iterations: 254
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xb0 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
Supported extended features:
* [ VHT_IBSS ]: VHT-IBSS
* [ RRM ]: RRM
* [ MU_MIMO_AIR_SNIFFER ]: MU-MIMO sniffer
* [ SCAN_START_TIME ]: scan start timestamp
* [ BSS_PARENT_TSF ]: BSS last beacon/probe TSF
* [ BEACON_RATE_LEGACY ]: legacy beacon rate setting
* [ FILS_STA ]: STA FILS (Fast Initial Link Setup)
* [ FILS_MAX_CHANNEL_TIME ]: FILS max channel attribute override with dwell time
* [ ACCEPT_BCAST_PROBE_RESP ]: accepts broadcast probe response
* [ OCE_PROBE_REQ_HIGH_TX_RATE ]: probe request TX at high rate (at least 5.5Mbps)
* [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
* [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
* [ ENABLE_FTM_RESPONDER ]: enable FTM (Fine Time Measurement) responder
* [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support
* [ PROTECTED_TWT ]: protected Target Wake Time (TWT) support
* [ DEL_IBSS_STA ]: deletion of IBSS station support
* [ BEACON_PROTECTION_CLIENT ]: beacon prot. for clients support
* [ SCAN_FREQ_KHZ ]: scan on kHz frequency support
* [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support
I am using the iwlwifi firmware directly from git.kernel.org (cloned and checkout out today).
I have googled the web, and they say it should be working now to set up a Wifi 6 AP with an AX210 card with a most recent firmware and kernel. I am using kernel 6.3.
But when I start hostapd, I get the following error message:
# hostapd -dd /etc/hostapd/hostapd.conf
random: getrandom() support available
Configuration file: /etc/hostapd/hostapd.conf
eapol_version=2
ctrl_interface_group=0
nl80211: TDLS supported
nl80211: TDLS external setup
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:8
nl80211: Supported cipher 00-0f-ac:9
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supported cipher 00-0f-ac:11
nl80211: Supported cipher 00-0f-ac:12
nl80211: Using driver-based off-channel TX
nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 04 00 00 00 00 00 00 40
nl80211: Driver-advertised extended capabilities for interface type STATION
nl80211: Extended capabilities - hexdump(len=8): 04 00 40 00 00 00 00 40
nl80211: Extended capabilities mask - hexdump(len=8): 04 00 40 00 00 00 00 40
nl80211: Use separate P2P group interface (driver advertised support)
nl80211: Enable multi-channel concurrent (driver advertised support)
nl80211: use P2P_DEVICE support
nl80211: key_mgmt=0x1ff0f enc=0x76f auth=0x7 flags=0x5800d30fb5bfbe0 rrm_flags=0x19 probe_resp_offloads=0x0 max_stations=0 max_remain_on_chan=10000 max_scan_ssids=20
nl80211: interface wlp2s0 in phy phy1
nl80211: Set mode ifindex 24 iftype 3 (AP)
nl80211: Setup AP(wlp2s0) - device_ap_sme=0 use_monitor=0
nl80211: Subscribe to mgmt frames with AP handle 0x557920775260
nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x557920775260 match= multicast=0
nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x557920775260 match= multicast=0
nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x557920775260 match= multicast=0
nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x557920775260 match= multicast=0
nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x557920775260 match= multicast=0
nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x557920775260 match= multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=04 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=0501 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=0503 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=0504 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=06 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=08 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=09 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=0a multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=11 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=12 multicast=0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x557920775260 match=7f multicast=0
rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
nl80211: Add own interface ifindex 6 (ifidx_reason 24)
nl80211: if_indices[16]: 6(24)
nl80211: Add own interface ifindex 24 (ifidx_reason -1)
nl80211: if_indices[16]: 6(24) 24(-1)
nl80211: Adding interface wlp2s0 into bridge br0
nl80211: Do not open EAPOL RX socket - using control port for RX
phy: phy1
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
wlp2s0: interface state UNINITIALIZED->COUNTRY_UPDATE
Previous country code DE, new country code DE
nl80211: No channel number found for frequency 5905 MHz
nl80211: Regulatory information - country=00
nl80211: 2402-2437 @ 40 MHz 22 mBm
nl80211: 2422-2462 @ 40 MHz 22 mBm
nl80211: 2447-2482 @ 40 MHz 22 mBm
nl80211: 5170-5190 @ 160 MHz 22 mBm (no outdoor) (no IR)
nl80211: 5190-5210 @ 160 MHz 22 mBm (no outdoor) (no IR)
nl80211: 5210-5230 @ 160 MHz 22 mBm (no outdoor) (no IR)
nl80211: 5230-5250 @ 160 MHz 22 mBm (no outdoor) (no IR)
nl80211: 5250-5270 @ 160 MHz 22 mBm (DFS) (no IR)
nl80211: 5270-5290 @ 160 MHz 22 mBm (DFS) (no IR)
nl80211: 5290-5310 @ 160 MHz 22 mBm (DFS) (no IR)
nl80211: 5310-5330 @ 160 MHz 22 mBm (DFS) (no IR)
nl80211: 5490-5510 @ 240 MHz 22 mBm (DFS) (no IR)
nl80211: 5510-5530 @ 240 MHz 22 mBm (DFS) (no IR)
nl80211: 5530-5550 @ 240 MHz 22 mBm (DFS) (no IR)
nl80211: 5550-5570 @ 240 MHz 22 mBm (DFS) (no IR)
nl80211: 5570-5590 @ 240 MHz 22 mBm (DFS) (no IR)
nl80211: 5590-5610 @ 240 MHz 22 mBm (DFS) (no IR)
nl80211: 5610-5630 @ 240 MHz 22 mBm (DFS) (no IR)
nl80211: 5630-5650 @ 240 MHz 22 mBm (DFS) (no IR)
nl80211: 5650-5670 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5670-5690 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5690-5710 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5710-5730 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5735-5755 @ 80 MHz 22 mBm (no IR)
nl80211: 5755-5775 @ 80 MHz 22 mBm (no IR)
nl80211: 5775-5795 @ 80 MHz 22 mBm (no IR)
nl80211: 5795-5815 @ 80 MHz 22 mBm (no IR)
nl80211: 5815-5835 @ 40 MHz 22 mBm (no IR)
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED]
nl80211: Mode IEEE 802.11a: 5180[NO_IR] 5200[NO_IR] 5220[NO_IR] 5240[NO_IR] 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5340[DISABLED] 5360[DISABLED] 5380[DISABLED] 5400[DISABLED] 5420[DISABLED]
nl80211: Mode IEEE 802.11a: 5955[DISABLED] 5975[DISABLED] 5995[DISABLED] 6015[DISABLED] 6035[DISABLED] 6055[DISABLED] 6075[DISABLED] 6095[DISABLED] 6115[DISABLED] 6135[DISABLED] 6155[DISABLED] 6175[DISABLED] 6195[DISABLED]
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED]
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=22 dBm
Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=22 dBm
Allowed channel: mode=2 chan=52 freq=5260 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=56 freq=5280 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=60 freq=5300 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=64 freq=5320 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=100 freq=5500 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=104 freq=5520 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=108 freq=5540 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=112 freq=5560 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=116 freq=5580 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=120 freq=5600 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=124 freq=5620 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=128 freq=5640 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=132 freq=5660 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=136 freq=5680 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=140 freq=5700 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=2 chan=144 freq=5720 MHz max_tx_power=22 dBm (DFS state = usable)
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=22 dBm
Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=22 dBm
Could not determine operating frequency
wlp2s0: interface state COUNTRY_UPDATE->DISABLED
wlp2s0: AP-DISABLED
wlp2s0: Unable to setup interface.
hostapd_interface_deinit_free(0x5579207699e0)
hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
hostapd_interface_deinit(0x5579207699e0)
wlp2s0: interface state DISABLED->DISABLED
hostapd_bss_deinit: deinit bss wlp2s0
wlp2s0: Deauthenticate all stations
nl80211: send_mlme - da=ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 no_encrypt=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
nl80211: send_mlme - Use bss->freq=0
nl80211: send_mlme -> send_frame_cmd
nl80211: CMD_FRAME freq=0 wait=0 no_cck=0 no_ack=0 offchanok=0
CMD_FRAME - hexdump(len=26): c0 00 00 00 ff ff ff ff ff ff 7c b5 66 c3 65 fe 7c b5 66 c3 65 fe 00 00 03 00
nl80211: Frame command failed: ret=-22 (Invalid argument) (freq=0 wait=0)
wlp2s0: AP-DISABLED
hostapd_cleanup(hapd=0x55792076b190 (wlp2s0))
wlp2s0: CTRL-EVENT-TERMINATING
hostapd_free_hapd_data: Interface wlp2s0 wasn't started
hostapd_interface_deinit_free: driver=0x55791fad4760 drv_priv=0x5579207700c0 -> hapd_deinit
nl80211: deinit ifname=wlp2s0 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
nl80211: Remove beacon (ifindex=24)
netlink: Operstate: ifindex=24 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 24 iftype 2 (STATION)
nl80211: Teardown AP(wlp2s0) - device_ap_sme=0 use_monitor=0
nl80211: Unsubscribe mgmt frames handle 0x8888ddf1a8ffdae9 (AP teardown)
hostapd_interface_free(0x5579207699e0)
hostapd_interface_free: free hapd 0x55792076b190
hostapd_cleanup_iface(0x5579207699e0)
hostapd_cleanup_iface_partial(0x5579207699e0)
hostapd_cleanup_iface: free iface=0x5579207699e0
Any ideas what could be wrong with my configuration?
After having started hostapd with this configuration, my 6 Ghz channels in iw list get disabled.
