I've got a new laptop for work and I'm essentially using it like a desktop. I've used the USB-C to DP to connect one 1920x1080 display at 60hz which is fine. My main display is a 4K 144hz panel and I was hoping to utilise that refresh rate.
xrandr
returns the following:
Screen 0: minimum 8 x 8, current 11120 x 3840, maximum 32767 x 32767
DP-0 connected 2160x3840+3840+0 left (normal left inverted right x axis y axis) 476mm x 267mm
1920x1080 60.00*+
1600x900 60.00
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary 5120x2880+6000+0 (normal left inverted right x axis y axis) 600mm x 340mm
3840x2160 60.00*+ 59.94 50.00 30.00 29.97 25.00 23.98
2560x1440 120.00
1920x1080 119.88 60.00 59.94 50.00 29.97 23.98
1280x720 59.94 50.00
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 59.94
640x480 59.94 59.93
As you can see, the HDMI input seems to only support 60hz at 4K resolution.
I'm using this exact cable.
Which should be capable of 4K@144hz.
I've tried both of my monitors HDMI ports just in case one is rated at 60hz or something.
My 4K monitor is this.
I don't suppose there's anything else I can try other than trying to set it manually in the CLI and trying different nVidia drivers?