Score:0

Setup L2TP Ubuntu Server without IPSec (yes I know thats very odd)

th flag

Im trying to tunnell my traffic from a bunch of low end mikrotik routers through a L2PT tunnel, and these routers are not powerful enough to run encryption. I have Ubuntu 20.04 VPS, and have installed xl2tpd. Ive been trying to follow this guide: https://smekkley.wordpress.com/tag/l2tp-without-ipsec/

Here are my configs so far:

[global]
port = 1701

[lns default]
ip range = 10.10.10.2-10.10.10.254
local ip = 10.10.10.1
require chap = yes
refuse pap = yes
require authentication = no
name = l2tpd
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes

and the PPP options file

+mschap-v2
ipcp-accept-local
ipcp-accept-remote
noccpauthcrtsctsidle 1800
defaultroute
mtu 1280
mru 1280
proxyarp
lcp-echo-failure 4
lcp-echo-interval 30
connect-delay 5000
ms-dns 8.8.8.8
ms-dns 8.8.4.4

and then my chaps-secrets

"username" l2tpd "password" *

I have my ipv4 forwarding rule setup, and port 1701 open in ufw. What am I missing here? my client will not connect!

Score:0
ph flag

I have the same questions I have practically the same setup except that my routers are archer c50's that offered only the l2pt option, does any one have an answer please.

mangohost

Post an answer

Most people don’t grasp that asking a lot of questions unlocks learning and improves interpersonal bonding. In Alison’s studies, for example, though people could accurately recall how many questions had been asked in their conversations, they didn’t intuit the link between questions and liking. Across four studies, in which participants were engaged in conversations themselves or read transcripts of others’ conversations, people tended not to realize that question asking would influence—or had influenced—the level of amity between the conversationalists.