When I scroll vertically, it scrolls horizontally in parallel. It is impossible to slide two fingers down in the table, so that there is no horizontal scrolling. This was not the case before. I want to make sure that when I scroll down in the table, the screen does not move a little to the right / left. That is, I want both horizontal and vertical scrolling to be available, but when calling one, the second one does not activate so quickly. I hope I have explained the essence of my problem)
is it possible to block both scrolling at the same time? (with two fingers, horizontal and vertical)
synclient -l
command response:
Parameter settings:
LeftEdge = 77
RightEdge = 1863
TopEdge = 70
BottomEdge = 1227
FingerLow = 25
FingerHigh = 30
MaxTapTime = 180
MaxTapMove = 102
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 10
EmulateTwoFingerMinW = 7
VertScrollDelta = -46
HorizScrollDelta = -40
VertEdgeScroll = 0
HorizEdgeScroll = 0
CornerCoasting = 0
VertTwoFingerScroll = 1
HorizTwoFingerScroll = 1
MinSpeed = 1
MaxSpeed = 1.75
AccelFactor = 0.0857265
TouchpadOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 2
RBCornerButton = 3
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 3
TapButton3 = 0
ClickFinger1 = 1
ClickFinger2 = 3
ClickFinger3 = 0
CircularScrolling = 0
CircScrollDelta = 0.1
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 1
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 20
CoastingFriction = 50
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
ResolutionDetect = 1
GrabEventDevice = 0
TapAndDragGesture = 1
AreaLeftEdge = 0
AreaRightEdge = 0
AreaTopEdge = 0
AreaBottomEdge = 0
HorizHysteresis = 11
VertHysteresis = 11
ClickPad = 1
RightButtonAreaLeft = 970
RightButtonAreaRight = 0
RightButtonAreaTop = 1063
RightButtonAreaBottom = 0
MiddleButtonAreaLeft = 0
MiddleButtonAreaRight = 0
MiddleButtonAreaTop = 0
MiddleButtonAreaBottom = 0