Latest Ubuntu related questions

Score: 2
How to get rid of an apt "Get more security updates through Ubuntu Pro with 'esm-apps' enabled" message on upgrade?
in flag

When upgrading system with sudo apt upgrade I'm getting the following message:

(..)
Get more security updates through Ubuntu Pro with 'esm-apps' enabled:
(..)

I know it's a paid service that can be used by up to 5 hosts/systems for free if it's for personal use, but I don't want to use it. I don't want to get more security updates and in addition, I don't want to see the above message each time I r ...

Score: 0
sillyajay avatar
Ubuntu 20.04 LTS Wireless Card Not Functioning
cy flag

Having an issue where my wireless card seems to be recognized by OS but that's about it. No SSIDs are visible. Ethernet is working fine. Linked is the output of some script I found: https://pastebin.com/zuQ8Nc0Q

Score: -3
Thomas Simpson avatar
localhost shows index of/ and not the wordpress file for configuration
ht flag

I tried the following: Edit the configuration file:

sudo {editor of choice} 000-default.conf

Note: Be sure to replace {editor of choice} with your editor of choice, be it nano, vim, or anything else that can edit text. Find the DocumentRoot value and edit it accordingly:

DocumentRoot /var/www/html/wordpress

Save the file Restart/Reload the Apache configuration files:

sudo service apache2 restart

And  ...

Score: 0
Ubuntu 22.04 hangs on boot, log shows the system is still running, cannot find cause
za flag

Running Ubuntu 22.04 on an HP HP ProBook 450. often on startup, the system will hand immediately after showing the fsck output. A non blinking cursor is shown and the system is not responsive, Only a hard reboot clears this. An error message is shown - different ones at different times.

On reviewing syslogs, however, it appears that the system goes on working. i have listed below some of the mess ...

Score: 0
Arth Mane avatar
Why is my Ubuntu 22.10 screen have no-icon marks all around?
bb flag

I've Installed Ubuntu 22.10 on my Dell Inspiron 3595 dualbooted with Windows 10. There were all icons at first. Then, I began noticing some no-icon marks around my desktop but I'm not sure what was the cause.

Please click me for proof

More Proof

Score: 0
Sushma avatar
Lightdm display manager timeout error
pt flag

In Ubuntu 18.04 using lightdm as a display-manager, but the status of the lightdm service is always activating and exactly at 90 Sec after service get started it was showing status=activating and session timeout and GUI screen is refreshing going back to login page

lightdm service:

systemctl status lightdm.service[FAILED] Failed to start Light Display Manager.
See 'systemctl status lightdm.service'  ...
Score: 0
Shammoo avatar
Attempted to Upgrade to Ubuntu 22, system won't start anymore
us flag

I upgraded Ubuntu via the "Do you want to upgrade" prompt from Software Upgrader.
Now this is the output when my system starts:

img

Typing on the keyboard does not work.

Score: 0
Pankaj avatar
Ubuntu VLAN configuration problems
cn flag

I've an Ubuntu box that is directly connecting to a port of firewall appliance running OPNSense. This port is running a DHCP on VLAN (say 10) and I need to configure the Ubuntu box to connect to it.

I tried several combination of code in Ubuntu's /etc/netplan/00-installer-config.yaml:

network:
  ethernets:
    eno1:
  version: 2
  vlans:
    vlan10:
      id: 10
      link: eno1
      dhcp4: yes
      ...
Score: 0
Misbehaving avatar
Ubuntu 22.04 crashed and is now asking for a fresh install when restarted
my flag

I’m running Ubuntu 22.04 on a 2008 MBP the SSD is brand new but has crashed after MPV (video player) was repeatedly opened and closed, now every time I restart I’m sent to system configuration and it’s asking for a fresh restart, does anyone know what is happening and how it can be fixed? I tried gparted but I can’t even check the desk I know the files are still on there because I’m able to lo ...

Score: 0
2fst4u avatar
Ubuntu server 22.04 fresh build locks up completely on HP prodesk 600 g4 mini
ci flag

I'm trying to install Ubuntu on my new to me HP prodesk 600 g4. It's second hand but from a refurb company so it should be in an ok state hardware wise.

The first time I noticed issues with the install was when the keyboard taps wouldn't respond during the install process from a live USB boot. I thought it was my keyboard's fault but I use this keyboard all the time and never had an issue. After  ...

Score: 0
ZumaUpsideDown avatar
Wi-Fi stops working after suspending the machine
ec flag

Well I normally don't ask for help on this type of forums, but I really need help

So yesterday I installed Ubuntu 22.04 and everything was going well, but after I suspended my machine and came back the Wi-Fi stopped working.

And I don't know if this is a common issue, so I came up with a solution that kinda fix the problem and it's basically preventing the computer from suspending itself.

But of course ...

Score: 0
monkincloud avatar
ubuntu zfs zpool lost after reboot due to /dev/sd* name re-ordered
ax flag

create zfs pool with:

$ sudo zpool create -f data raidz2 sda sdb sdc sdd
$ sudo zpool status
  pool: data
 state: ONLINE
  scan: none requested
config:

    NAME        STATE     READ WRITE CKSUM
    data        ONLINE       0     0     0
      raidz2-0  ONLINE       0     0     0
        sda     ONLINE       0     0     0
        sdb     ONLINE       0     0     0
        sdc     ONLINE       0    ...
Score: -1
Nikolay Stadnik avatar
I currently have no source.list directory or file due to too many failed to fetch errors, how can I resolve?
kr flag

Give me Please /etc/apt/sources.list

Description: Ubuntu 22.04.2 LTS Release: 22.04 Codename: jammy

Score: 0
Bud Spencer avatar
Function expand ssh execution
vu flag

As part of a script which runs on another (backup) server I'm trying to write a function which executes random commands remotely via ssh. To keep things simple, I want to keep the existing code mostly as is.

An example what I'm trying to do:

function NC_SSH_CMD () {
   cmdArgs=("$@")
   ssh -i [email protected] "bash -s" < ${cmdArgs[@]}
}

NC_SSH_CMD sudo -u "${webserverUser}" php ${nextcloudFil ...
Score: 0
BlueFire avatar
Bluetooth not worknig on Macbook Pro - 2016 - 5.19.0-38-generic #39-Ubuntu
sg flag

I am having problems configuring the bluetooth on my device. I tried different ways, but I cannot make this work. Could you please help me on solving this?

~$ lspci -knn | grep Net -A3; lsusb; uname -r; sudo dmesg | egrep -i 'blue|firm'
02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4350 802.11ac Wireless Network Adapter [14e4:43a3] (rev 05)
    Subsystem: Apple Inc. BCM4350 8 ...
Score: 0
DonP avatar
Error missing amdgpu firmware
cn flag

My laptop has ATI Radeon Xpress 200M graphics and has an AMD Turion65 processor but apparently incorrect amdgpu drivers are installed. How do I remove them and install the correct drivers?

This is a recent fresh install of Lubuntu 22.10 on an old Gateway MX6440 laptop which has 1TB IDE SSD and 2GB RAM which is the max available for it.

Score: 0
Jure Merhar avatar
strange entries in ufw log
in flag

I have a very permissive firewall configuration, where I have almost all ports open:

$ sudo ufw status verbose
Status: active
Logging: on (low)
Default: allow (incoming), allow (outgoing), deny (routed)
New profiles: skip

To                         Action      From
--                         ------      ----
Anywhere                   ALLOW IN    127.0.0.1
Anywhere                   ALLOW IN    10 ...
Score: -1
Henrique Andrade avatar
Install Ubuntu on Windows with BitLocker (Please unlock disk nvme0n1p3_crytp)
sb flag

I have a Windows machine with BitLocker. I turned off BitLocker, created a new partition, restarted the machine and entered in the Ubuntu installation interface. I get blocked on a screen with a password input and the phrase "Please unlock disk nvme0n1p3_crytp". What should I do? Is this caused by BitLocker? I had Ubuntu installed before on this machine with disk encryption enabled, but this is a new Ub ...

Score: 0
FalcoGer avatar
Grub2 boot from iso image
mx flag

I have set up a PXE boot environment using pxelinux but since I updated my motherboard's firmware, it doesn't support legacy mode anymore. So I added support for UEFI mode to my PXE setup.

I have compiled grub 2.06 with all modules included and am now at a point where I can boot into grub and it actually loads the grub.cfg from the TFTP server. I can boot my diskless ubuntu installation from NFS, ...

Score: 0
Vran Jericevic avatar
Cannot open blender 2.79 on blender in ubuntu 20.04
th flag

Hello so i have installed blender 2.79 from https://www.blender.org/download/releases/2-79/ and extract it and i tried to open the blender program from the extracted file and it wont open it doesent show any error it just dosent open.

Score: 0
George Barnes thefunkygorilla avatar
google stadia to bluetooth chromium issue

hello im trying to change the google stadia controller to bluetooth mode but i keep getting the issue

Close other tabs using the controller Couldn’t connect to your controller because it’s currently being used by another tab or program.

Close any tabs or programs using the controller, then try again.

is there any fix

iv used lsusb and i can confirm that ubuntu does indeed see the controller

ple ...

Score: 0
Tom A. avatar
Trouble add second site to apache2
za flag

I'm running Apache2 on a VPS running ubuntu 20.04. I have a site up and working let call it linuxtom.com. I'm trying to add a second site lets call it ponytattoomachine.com. I've made the virtual host for ponytattoomachine called ponytm.conf in /etc/apache2/sites-available and I've made it as simple as possible

<VirtualHost *:80>

ServerName ponytattoomachine.com

DocumentRoot /srv/www2/

&lt ...
Score: 0
chuygb avatar
ZFS Ubuntu 20.04, Failed Drive makes pool unavailable
pt flag

I have a recent Build of Ubuntu 20.04, Fresh installation 3 months ago, Installed on an SSD (No Boot ZFS), where I created 2 zpools: one 'zombiepool2' 4 x 2TB (not, very new drives), second 'zombiepool' 3 x 3TB, both raidz1 for PLEX server One morning there was a clicking sound on the 4 drive pool, and one drive is shown as FAILED where the pool is also FAILED, my problems is: 1-I swapped bad drive for ...

Score: 0
George avatar
Operating System not found with Ubuntu LTS 22.04
gr flag

Since the beginning of this month, I’ve had little to no success with installing the LTS version of Ubuntu 22.04. When the installation asks me to remove the USB and reset the system, “Operating system not found” appears on the screen at startup.

I’m trying this on a Dell Inspiron N7110 that originally ran Windows 7. The BIOS does not include a UEFI option nor does it allow me to toggle S ...

Score: 2
EndRE32 avatar
How to create a script to change the screen resolution? (Wayland)
lk flag

I just want to make a script to change my screen resolution. I found many guides to do that, but all of them are made for Xorg Display Server users and i could't find one for Wayland. My question is, there is any way to make a script for that using Wayland?
I want to change the main "XWAYLAND1" monitor to 1280x720 and back to 1920x1080. I'm using Ubuntu 22.10
xrandr output:

Screen 0: minimum 16 x 16,  ...
Score: 0
User1986 avatar
Accidentally uninstalled gnome 38, software center wont open
al flag

OS: Ubuntu 22.04.2 LTS

Hey there. I was just browsing through my ubuntu software center and uninstall and accidentally clicked the wrong thing, and uninstalled "gnome-38 something". everything seems to work fine, but the software center closed, and wont open again even after restart. I tried sudo apt install gnome-software and a new app appeared in the dashboard: enter image description here

It has missing textures, and is not the ...

Score: 0
Barge8900 avatar
Primary monitor audio device not available on Nvidia GPU with MST
yt flag

I have 2 monitors daisy-chained on display port connected to my Nvidia 4070 using MST. I have speakers connected to the audio out on my primary monitor (Dell U2419HC), but the sound settings only shows the motherboard Line Out or the secondary display when I use MST. If I disable MST then it outputs through the primary monitor but I lose the second monitor. I'm on driver version 525.105.17. The setup wo ...

Score: 0
Thomas Maréchal avatar
openshot not launching (ubuntu 22.04)
sj flag

I am using Ubuntu 22.04 and Openshot video editor is not launching, I tried removing and reinstalling and installing PPA.

This is what I get from the terminal:

Loaded modules from: /usr/lib/python3/dist-packages/openshot_qt
INFO app: ---------------------------------------------
INFO app:             Sun Apr 16 17:09:43 2023            
INFO app:               Starting new session              
INFO a ...
Score: 0
Keith Bennett avatar
How to encrypt Linux data on a drive with Windows partitions?
th flag

I just got a new LG Gram 17" laptop and have shrunk the Windows partition to 50 GB. (To my surprise, the system already uses 45 GB of it!) Anyway, I would love to keep the ability to boot into native Windows. I have successfully installed Ubuntu Mate on another partition and dual boot works. However, I want my data on the Linux partition to be encrypted, and it seems that now the preferred method for Li ...

Score: 0
magicwonderbear avatar
mouse cannot click-and-hold
lc flag

I have Ubuntu 22.04.2 LTS, GNOME Version 42.5, OS Type 64bit, Windowing System "Wayland".

I suffer the problem, potentially a bug, that the mouse cannot grab a thing. Examples are:

  • When I try to grab a scroll-bar and move it down, so the website scrolls down, then neither the scrollbar nor the website will move down as I move the mouse. Gladly, once I release the mousebutton, the scrollbar jumps to t ...

The Stunning Power of Questions

Much of an executive’s workday is spent asking others for information—requesting status updates from a team leader, for example, or questioning a counterpart in a tense negotiation. Yet unlike professionals such as litigators, journalists, and doctors, who are taught how to ask questions as an essential part of their training, few executives think of questioning as a skill that can be honed—or consider how their own answers to questions could make conversations more productive.

That’s a missed opportunity. Questioning is a uniquely powerful tool for unlocking value in organizations: It spurs learning and the exchange of ideas, it fuels innovation and performance improvement, it builds rapport and trust among team members. And it can mitigate business risk by uncovering unforeseen pitfalls and hazards.

For some people, questioning comes easily. Their natural inquisitiveness, emotional intelligence, and ability to read people put the ideal question on the tip of their tongue. But most of us don’t ask enough questions, nor do we pose our inquiries in an optimal way.

The good news is that by asking questions, we naturally improve our emotional intelligence, which in turn makes us better questioners—a virtuous cycle. In this article, we draw on insights from behavioral science research to explore how the way we frame questions and choose to answer our counterparts can influence the outcome of conversations. We offer guidance for choosing the best type, tone, sequence, and framing of questions and for deciding what and how much information to share to reap the most benefit from our interactions, not just for ourselves but for our organizations.